Power Monitoring Solutions
Monitoring solutions that deliver increased visibility and control of critical support systems for single modules, small data centers or all critical facilities in small to medium businesses.
Fundamental Monitoring
Fundamental site monitoring of Liebert products allows you to leverage Web technology to oversee and control critical support systems — anywhere, anytime
- version 3.0) Liebert Nform Professional Edition
Centralized monitoring software solution designed to meet the monitoring needs of smaller companies. Provides simple network management of distributed Liebert equipment with basic notifications and messaging.
- (version 3.0) Liebert Nform Business Edition Centralized Monitoring Software
Software solution designed to meet the needs of IT management of critical systems within medium size companies. Allows for multiple users, license for notifications, and alarm filters for direct integration with an existing network management system.
- Liebert OpenComms EM Environmental Monitor
Compact, half-duplex device designed to monitor temperature, humidity, water detection and contact closure and notify personnel when those conditions exceed user-defined limits.
Liebert OpenComms Webcard
Battery Monitoring
Preventing battery failure is essential for delivering maximum availability. Liebert products incorporate Alber technology to extend battery life, reduce maintenance cost and increase safety.
- Alber MPM-100 Battery Monitoring System
Diagnostic system designed for lower cell count applications such as telecom or stationary battery systems. It identifies potential problems by continuously monitoring parameters such as cell voltage, overall string voltage, current and temperature. Automatic periodic tests of battery internal resistance verify the operating integrity of the battery.
- Alber BDS-40 Battery Monitoring System
Battery monitoring system that mounts to the top of a UPS battery cabinet and monitors 12 volt sealed batteries. The easy-to-use system tracks internal resistance, predicting and reporting failing conditions prior to complete failure to allow proactive replacement.
A full line of power communications software and hardware products provides both network enabled and dedicated out-of-band options for each level of power protection.
- Liebert MultiLink Automated Shutdown Software
Automated shutdown software that perfectly complements a Liebert UPS system, preventing unexpected server shutdowns and minimizing downtime. The software provides unattended, orderly shutdown for one computer or many, and is especially effective with large server farms. Available for most popular operating systems, Liebert MultiLink has full event management and displays UPS instrumentation on screen.
Performance monitoring solutions provide multiple paths for integrating Liebert equipment into your Building or Network Management system.
- Liebert SiteLink Communication Interface
Allows communications between existing building management system and Liebert environmental, power and uninterruptible power supply products via Modbus or BACnet. Liebert Sitelink modules are available in 12-port and 4-port configurations.
- Liebert SiteLink-E Communication Interface
An Ethernet-ready device that supports all Emerson protocol interfaces as a BACnet router. It provides the communications link between an existing Building Management System and Liebert precision cooling and power and UPS systems.
- Liebert IntelliSlot 485 Interface Card
Allows monitoring and control of your Liebert equipment through Liebert SiteScan Web or your existing Building Management System. The interface delivers Modbus or Liebert proprietary protocol via the EIA-485 port.
Monitoring solutions that deliver increased visibility and control of critical support systems for single modules, entire data centers or all critical facilities in an enterprise.
Advanced MonitoringAdvanced site monitoring assures you attain maximum availability for your critical operations. Liebert solutions allow you leverage Web technology to oversee and control critical support systems—anywhere, anytime.
- Liebert SiteScan Web Centralized Monitoring and Control
Allows monitoring and control of virtually any piece of critical support equipment — whether located in the next room or in a facility on the other side of the country. The web-based system provides centralized oversight of Liebert precision air, power and UPS units, as well as many other analog or digital devices. Features include real-time monitoring and control, data analysis and trend reporting, and event management.
- Liebert IntelliSlot Web Card Communications Interface Card
Delivers SNMP, Telnet and web-management capability for enhanced communications and control of Liebert UPS, Power Management or Precision Cooling systems. The card manages a wide range of operating parameters, alarms and notifications, transmitting data over the network.
- Liebert IntelliSlot Relay Interface Card
Provides contact closures for remote monitoring of alarm conditions of Liebert UPS systems equipped with an Intellislot communication port. The card delivers On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals to relay contact monitoring systems. The card is user-installable and hot-swappable.
- Liebert Open Comms Webcard
Battery monitoring system that mounts to the top of a UPS battery cabinet and monitors 12 volt sealed batteries. The easy-to-use system tracks internal resistance, predicting and reporting failing conditions prior to complete failure to allow proactive replacement
A full line of power communications software and hardware products provides both network enabled and dedicated out-of-band options for each level of power protection.
- Liebert MultiLink Automated Shutdown Software
Automated shutdown software that perfectly complements a Liebert UPS system, preventing unexpected server shutdowns and minimizing downtime. The software provides unattended, orderly shutdown for one computer or many, and is especially effective with large server farms. Available for most popular operating systems, Liebert MultiLink has full event management and displays UPS instrumentation on screen.
Performance monitoring solutions provide multiple paths for integrating Liebert equipment into your Building or Network Management system.
- Liebert SiteLink Communication Interface
Allows communications between existing building management system and Liebert environmental, power and uninterruptible power supply products via Modbus or BACnet. Liebert Sitelink modules are available in 12-port and 4-port configurations.
- Liebert SiteLink-E Communication Interface
An Ethernet-ready device that supports all Emerson protocol interfaces as a BACnet router. It provides the communications link between an existing Building Management System and Liebert precision cooling and power and UPS systems. >
- Liebert IntelliSlot 485 Interface Card
Allows monitoring and control of your Liebert equipment through Liebert SiteScan Web or your existing Building Management System. The interface delivers Modbus or Liebert proprietary protocol via the EIA-485 port
A wide range of leak detection systems provides fast detection and location reporting of potentially hazardous fluid .
Zone leak detection sensor modules that install quickly and work simply for reliable warning of potentially hazardous moisture leaks. The supervised zone leak detector uses up to 100 feet of flexible Liebert moisture sensing cable, offering protection for hard to reach spots and sensitive areas that require protection against leaks.
Zone leak detection sensor modules that install quickly and work simply for reliable warning of potentially hazardous moisture leaks. The supervised zone leak detector uses up to 100 feet of flexible Liebert moisture sensing cable, offering protection for hard to reach spots and sensitive areas that require protection against leaks.
Point detection modules that install quickly and work simply for reliable warning of potentially hazardous moisture leaks at critical points under a raised floor. A simple two-wire connection signals the alarms to a Liebert environmental unit monitor panel or at another monitoring panel.
Leak detection cable designed for use with Liebert Liqui-tect two-channel leak detection and reporting system, and Liebert LT460 zone leak detection sensors. The memory-resistant flexible cable is easy to install, and it includes mating connectors for quick extension or connection to the reading unit. Multi-wire design provides precise signaling.
In Smart Metering Solutions, data Collected from existing dump meter and make them IoT enabler. With smartphone you can read, control and get alerts with hierarchical order from anywhere in world. On request can provide one day’s minute wise energy profile with all energy parameters.
Benefits To Customer- Instant SMS / Notification alerts user against overcurrent
- Ease to record data
- View Avg, Min & Max values for day / Week/ Month along with alarm level
- Various addon features enables customer to have energy saving benefits with protection
- With all meter’s data on one screen; can identify exact machine wise usage data to know Energy usage over productivity
Monitoring is online web based in real time. You can monitor remotely energy parameters -
- Volt, Amp, Hz, PF, KW, KWH, KVA, KVAH from your central control room PC/home PC or on your smart phone.
- It can be installed anywhere for remote energy & power management.
- Simple applications are street light automation, energy monitoring of local substations on distribution side, dg set load management,any electrical machine or system where routine energy management and analysis is to be done continuously.