UPS Systems, Custom Built Industrial UPS, UPS Accessories, Telecom Inverter, Solar PCU, Frequency Converter, Static Transfer Switches, Digital Active Power Conditioner, Pune, India
 

Power Monitoring Solution

 
Power Monitoring Solution
Small Data Center/Network Access
Monitoring solutions that deliver increased visibility and control of critical support systems for single modules, small data centers or all critical facilities in small to medium businesses.
 
Fundamental Monitoring
Fundamental site monitoring of Liebert products allows you to leverage Web technology to oversee and control critical support systems — anywhere, anytime
 
• (version 3.0) Liebert Nform Professional Edition
Centralized monitoring software solution designed to meet the monitoring needs of smaller companies. Provides simple network management of distributed Liebert equipment with basic notifications and messaging.

• (version 3.0) Liebert Nform Business Edition Centralized Monitoring Software
Software solution designed to meet the needs of IT management of critical systems within medium size companies. Allows for multiple users, license for notifications, and alarm filters for direct integration with an existing network management system.

• Liebert OpenComms EM Environmental Monitor
Compact, half-duplex device designed to monitor temperature, humidity, water detection and contact closure and notify personnel when those conditions exceed user-defined limits.
• Liebert OpenComms Webcard
 
Battery Monitoring
Preventing battery failure is essential for delivering maximum availability. Liebert products incorporate Alber technology to extend battery life, reduce maintenance cost and increase safety.
 

• Alber MPM-100 Battery Monitoring System
Diagnostic system designed for lower cell count applications such as telecom or stationary battery systems. It identifies potential problems by continuously monitoring parameters such as cell voltage, overall string voltage, current and temperature. Automatic periodic tests of battery internal resistance verify the operating integrity of the battery.

• Alber BDS-40 Battery Monitoring System
Battery monitoring system that mounts to the top of a UPS battery cabinet and monitors 12 volt sealed batteries. The easy-to-use system tracks internal resistance, predicting and reporting failing conditions prior to complete failure to allow proactive replacement.

 
Automated Shutdown Software
A full line of power communications software and hardware products provides both network enabled and dedicated out-of-band options for each level of power protection.
 
• Liebert MultiLink Automated Shutdown Software
Automated shutdown software that perfectly complements a Liebert UPS system, preventing unexpected server shutdowns and minimizing downtime. The software provides unattended, orderly shutdown for one computer or many, and is especially effective with large server farms. Available for most popular operating systems, Liebert MultiLink has full event management and displays UPS instrumentation on screen.
 
Third Party Systems
Performance monitoring solutions provide multiple paths for integrating Liebert equipment into your Building or Network Management system.
 
•Liebert SiteLink Communication Interface
Allows communications between existing building management system and Liebert environmental, power and uninterruptible power supply products via Modbus or BACnet. Liebert Sitelink modules are available in 12-port and 4-port configurations.

• Liebert SiteLink-E Communication Interface
An Ethernet-ready device that supports all Emerson protocol interfaces as a BACnet router. It provides the communications link between an existing Building Management System and Liebert precision cooling and power and UPS systems.

• Liebert IntelliSlot 485 Interface Card
Allows monitoring and control of your Liebert equipment through Liebert SiteScan Web or your existing Building Management System. The interface delivers Modbus or Liebert proprietary protocol via the EIA-485 port.
 
Large Data Center
 
Monitoring solutions that deliver increased visibility and control of critical support systems for single modules, entire data centers or all critical facilities in an enterprise.

Advanced Monitoring
Advanced site monitoring assures you attain maximum availability for your critical operations. Liebert solutions allow you leverage Web technology to oversee and control critical support systems—anywhere, anytime.
 
• Liebert SiteScan Web Centralized Monitoring and Control
Allows monitoring and control of virtually any piece of critical support equipment — whether located in the next room or in a facility on the other side of the country. The web-based system provides centralized oversight of Liebert precision air, power and UPS units, as well as many other analog or digital devices. Features include real-time monitoring and control, data analysis and trend reporting, and event management.
• Liebert IntelliSlot Web Card Communications Interface Card
Delivers SNMP, Telnet and web-management capability for enhanced communications and control of Liebert UPS, Power Management or Precision Cooling systems. The card manages a wide range of operating parameters, alarms and notifications, transmitting data over the network.
• Liebert IntelliSlot Relay Interface Card
Provides contact closures for remote monitoring of alarm conditions of Liebert UPS systems equipped with an Intellislot communication port. The card delivers On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals to relay contact monitoring systems. The card is user-installable and hot-swappable.
• Liebert Open Comms Webcard
Battery monitoring system that mounts to the top of a UPS battery cabinet and monitors 12 volt sealed batteries. The easy-to-use system tracks internal resistance, predicting and reporting failing conditions prior to complete failure to allow proactive replacement
 
Automated Shutdown Software
A full line of power communications software and hardware products provides both network enabled and dedicated out-of-band options for each level of power protection.
 
• Liebert MultiLink Automated Shutdown Software
Automated shutdown software that perfectly complements a Liebert UPS system, preventing unexpected server shutdowns and minimizing downtime. The software provides unattended, orderly shutdown for one computer or many, and is especially effective with large server farms. Available for most popular operating systems, Liebert MultiLink has full event management and displays UPS instrumentation on screen.
 
Third Party Systems
Performance monitoring solutions provide multiple paths for integrating Liebert equipment into your Building or Network Management system.
 
• Liebert SiteLink Communication Interface
Allows communications between existing building management system and Liebert environmental, power and uninterruptible power supply products via Modbus or BACnet. Liebert Sitelink modules are available in 12-port and 4-port configurations.
• Liebert SiteLink-E Communication Interface
An Ethernet-ready device that supports all Emerson protocol interfaces as a BACnet router. It provides the communications link between an existing Building Management System and Liebert precision cooling and power and UPS systems.
• Liebert IntelliSlot 485 Interface Card
Allows monitoring and control of your Liebert equipment through Liebert SiteScan Web or your existing Building Management System. The interface delivers Modbus or Liebert proprietary protocol via the EIA-485 port
 
Leak Detection
A wide range of leak detection systems provides fast detection and location reporting of potentially hazardous fluid .
 
• Liebert Liqui-tect Two Channel Leak Detection System
Zone leak detection sensor modules that install quickly and work simply for reliable warning of potentially hazardous moisture leaks. The supervised zone leak detector uses up to 100 feet of flexible Liebert moisture sensing cable, offering protection for hard to reach spots and sensitive areas that require protection against leaks.
• Liebert LT460 Zone Leak Detection Sensor
Zone leak detection sensor modules that install quickly and work simply for reliable warning of potentially hazardous moisture leaks. The supervised zone leak detector uses up to 100 feet of flexible Liebert moisture sensing cable, offering protection for hard to reach spots and sensitive areas that require protection against leaks.
• Liebert LT410 Point Leak Detection Sensors
Point detection modules that install quickly and work simply for reliable warning of potentially hazardous moisture leaks at critical points under a raised floor. A simple two-wire connection signals the alarms to a Liebert environmental unit monitor panel or at another monitoring panel.
• Liebert LT500Y Leak Detection Cable
Leak detection cable designed for use with Liebert Liqui-tect two-channel leak detection and reporting system, and Liebert LT460 zone leak detection sensors. The memory-resistant flexible cable is easy to install, and it includes mating connectors for quick extension or connection to the reading unit. Multi-wire design provides precise signaling.
 
 
 
Company Profile
 
Syscon Enterprises, with more than two decades of experience, is promoted by qualified and experienced professionals to offer products & solutions that meet the demanding customer’s requirements. Professional management with thrust on customer satisfaction enable the company to continuously specialize and innovate in Power Quality Products